Supplies you'll need:
Black bead for eye. (I used a black onyx round bead)
Your sculpting tools
Something to roll the clay out with
Acrylic paints (I used French Vanilla, Dark Brown, Black and Metallic Copper but feel free to choose the colors you like!)
Strong Glue for pin back (I use E-6000)
Protective Urethane spray
Okay, let's play!
Step 2. Now take all those nice clay balls and roll them into cone shapes about 1 1/2 inches long.
Step 3. Lay all your clay cones out into the shape of the tail feathers and gently flatten a bit. Don't worry if the bottoms don't match, you're going to trim them next.
Step 4. Now trim the bottoms of your feathers to make a nice curved arch.
Step 5. Time for a bit a detail. You can use a toothpick or a tool with a straight edge to add details to the tail feathers. Don't push all the way through the clay, you just want the lines deep enough to hold onto the dark brown paint later. Now let the tail feather dry a bit, you don't want to squish out all your lovely work.
Step 6. After the tail feathers have dried a bit it's time to add the rest of the turkey. Make a ball of clay a little bit smaller than the size you want the body. Before pressing it in place, brush a little bit of craft glue along the bottom edge of the feathers to help the body stick. Now press the ball in place and shape it till you like the way it looks.
Step 7. I added feather details to the body with a silicone tipped sculpting tool but you can use a piece of wire bent into a U shape to stamp feather impressions into the body.
Step 8. Next we'll make the turkey's neck, head and the wattle. The WHAT? LOL. The wattle is that hangy down thingy on the turkey's beak and neck. (I didn't know either so I looked it up!) Just make a snake shape, give it a little curve, paint a little glue on the back and press in place. The head is a flattened ball of clay with one edge pinched out a little for his beak. The wattle (teehee) is a tear shape press in place. Don't forget to paint a little glue on the back of each piece before pressing into place.
Step 9. Here's lookin at ya! Add a little glue to your bead and press it into the head.Now let this all dry. If you're like me and you can't stand to wait a few hours do what I do. Warm your oven to 200 degrees. Turn oven off, place your turkey pin in oven on something flat, like a cake pan and leave in oven till dry. Keep an eye on it though, in case it starts to crack or bend.
Step 10. Now that your pin is dry you can add the nice smooth bottom. Roll out a chunk of clay to about 1/8 inch. Paint glue all over the back of your pin and then gently press the turkey onto the rolled out clay. Trim all the extra clay away from the pin and smooth the edges. Let dry again.
Step 11. Once your pin is completely dry you can paint it in the colors of your choice. Once your paint is dry, thin your dark brown paint just a little with water and then paint over small sections at a time, making sure you get it into all those wonderful details. Gently wipe off with a damp cloth or sponge before it dries. I use a makeup sponge for this. They work great and are soft enough that they don't pull of any of the other dried paint. This helps pop out your details.
You can spray a protective coating on your pin after it is completely dry. I used a matte finish by Krylon.
I hope you enjoyed my Thanksgiving Turkey Pin tutorial. I had fun creating it for you!